Excavator eo-3322b
EXCAVATOR EO-3322B (Fig. 9) is designed for excavation of soil of groups 1-4, extracting wells and other local excavations, loading pre-loosened soil 4 5 groups of frozen soil, as well as bulk materials from a pile and other works in a temperate climate at a temperature ambient air from -40 to +40 °С.
Technical specifications
The highest speed of movement, km/h …………………19.66
The greatest overcome rise, hail………………….22
Rated, power, hp………………………………………..75
Nominal flow rate of hydraulic fluid, l/min………………….330
Rated pressure in the hydraulic system, MPa………………….16
The excavator is supplied to consumers equipped with a backhoe with a bucket with a capacity of 0.5 m3.
The following types of replaceable working bodies can be supplied by the manufacturer according to the orders of consumers. Backhoe equipment: buckets with a capacity of 0.4; 0.63 and 0.2 m; ladle with a profile capacity of e 0.5 m; hydraulic hammer SP-71; static action ripper; extended handle.
Fig.9. Scheme of the excavator EO-3322B:
R is the radius of rotation of the tail section, m………………………………2.8
B - width of the turntable (in the cab), m………………..2.66
В — cabin height, m……………………………………………………….3.14
G - the height of the axis of the five arrows, m……………,…………………………….1.96
A - distance from the axis of the heel of the boom to the axis of rotation, m……….0.45
E - base, m………………………………………………………………………..2.8
W - gauge, m………………………………………………………………………2.04
K - width of the chassis, m………………………………………………..2.7
L - from the axis of rotation of the excavator to the axis of the rear wheels, m…..……1
M - width when working on outriggers, m……………………..1,3
For clamshell equipment: double-jaw clamshell buckets with a capacity of 0.32 and 0.5 m; clamshell bucket with a capacity of 0.35 / 0.5 m.
For direct digging equipment - buckets with a capacity of 0.57 and 1 m3.
Schemes and kinematic parameters of the working area of the EO-3322B excavator with backhoe equipment, clamshell equipment, direct digging equipment and various working bodies are shown in Fig. 10-15.
Fig.10. Scheme of operation of the excavator EO-3322B
| The EO-3322B excavator manufactured by the Kalinin Excavator Plant is designed to excavate soil of groups I-IV, excavate wells and other local excavations, load pre-loosened soil of groups V and VI and frozen soil, as well as load various bulk materials from a pile and other works in conditions of moderate climate at ambient temperature from -40 to +40°C. Technical specifications The highest speed of movement, km/h
The excavator is delivered to consumers equipped with a backhoe with a bucket with a capacity of 0.5 m3. According to the orders of consumers, the manufacturer can supply the following types of related working bodies. Backhoe equipment (with a monoblock or compound boom): buckets with a capacity of 0.4; 0.63 and 0.2 m3; ladle profile with a capacity of 0.5 m3; hydraulic hammer SP-71; static action ripper; extended handle. Scheme of the excavator EO-3322B
For clamshell equipment: double-jaw clamshell buckets with a capacity of 0.32 and 0.5 m3; clamshell bucket with a five-jaw capacity of 0.35 / 0.5 m3. For direct digging equipment - buckets with a capacity of 0.57 and 1 m3. Scheme of operation of the excavator EO-3322B
Scheme of operation of the EO-3322B excavator with a backhoe and a ripper tooth
Scheme of fixing the hydraulic hammer SP-71 on the excavator EO-3322B
Scheme of operation of the hydraulic hammer SP-71 on the excavator EO-3322B
Technical specifications
Scheme of operation of the EO-3322B excavator with clamshell equipment
Scheme of operation of the EO-3322B excavator with loading equipment
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name (to Fig. 10) | Normal stick with m bucket | Reach stick with m bucket | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| R-radius described by the edge of the clod tooth, m | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| R- the largest digging radius at the parking level, m | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| H - maximum digging depth, m | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| H-maximum unloading height, m | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| R- unloading radius at the highest unloading height, m | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fig.11. Scheme of work of the excavator EO-3322B with a backhoe and a ripper tooth
R- the largest digging radius at the level of the parking lot, m…………8.1
H- the maximum allowable depth of slaughter, m……………………..0.4
R- radius described by the cutting edge of the tooth, m………………0.6
Fig.12. Scheme of fixing the hydraulic hammer SP-71 on the excavator EO-3322B
H- height of hydraulic hammer with wedge, mm…………………………2530
в — hydraulic hammer width, mm ………………………………………640
l- wedge length, mm……………………………………………………500
Fig.13. The scheme of operation of the hydraulic hammer SP-71 on the excavator EO-3322B:
H- the greatest depth of loosening, m………………………….5.3
R - the smallest loosening radius at the parking level, m 3.5
R- the largest loosening radius at the parking level, m 7.6
Face width (rational), m……………………………….5
studfiles.net
High performance and ease of transport - a successful combination
One of the main advantages of hydraulic excavators weighing from 25 to 35 tons is that, due to their rather large size and weight, they are able to perform large volumes of earthmoving work and at the same time are relatively compact and easily transported from one construction site to another. Of course, they are inferior to heavier machines designed for large-scale excavation, but they develop high enough productivity in excavation to be successfully used in large construction projects. Their rather high power with small dimensions is of great importance for work in cramped construction conditions.
These versatile machines can be used on a wide range of construction sites and are used in a wide variety of jobs across a wide range of industries, from large infrastructure projects to underground utilities, from road construction to pipeline laying, from site preparation to demolition. and structures.
For example, Volvo CE offers the E-series models, the EC250E and EC300E, with 159 and 179 kW engines, respectively. The operating weight of these machines, depending on the configuration, is 25.5–28.93 tons for the EC250E and 29.22–32.77 tons for the EC300E. The undercarriage of excavators is reinforced. Sturdy lower X-frame ensures even load distribution. In terms of functionality, they can be called universal machines, since they occupy an intermediate position between a carrier machine for replaceable attachments and a machine for large volumes of earthmoving work.
Domestic - a joint venture of Russian Machines Corporation and Terex Corporation - offers a mod in the weight range under consideration. ET-26 weighing 26.5 tons with a 132 kW engine. A powerful, unpretentious earth-moving machine is designed for the development of soils of categories I–IV, loosened rocks and frozen soils, loading and unloading of bulk materials.
The upper part of this weight range includes Case : mod. СХ350В weighing 34.2 kW and mod. СХ370В weighing 36.2 tons. Both machines are equipped with a 202 kW engine. The manufacturer offers for them several options for handles with a length of 2.21 to 4.04 m.
In this weight range, there are also highly specialized models, for example, Liebherr offers a tunnel excavator mod. R924 Compact with a 129 kW engine and a weight of 33-34.5 tons. The machine is equipped with a special stick and boom “for tunneling” with a mechanism that tilts the working tools by 2x45 ° and with a quick adapter for connecting interchangeable attachments. The hydraulic equipment on the boom is optimized for connecting a milling drill head.
Hidromek 's offer is a powerful, reliable and comfortable HMK300LC excavator with a bucket capacity of 1.5 m3 and a weight of 31 tons, which is equipped with a 151 kW Tier 3 emission class engine or a 161 kW Tier 2 engine. and working equipment for rocky soils, in combination with a reliable and economical engine, this machine can be used both for earthmoving and for loading and unloading inert materials. Options with a narrow bottom frame or extended implements will allow you to choose the machine that best meets your needs.
Excavator EO-3322V (technical specifications)
| The EO-3322V excavator manufactured by the Kalinin Excavator Plant is designed for excavation of soils of I-III groups, leveling of slopes and horizontal surfaces, earthworks, as well as cleaning up shortfalls in the development of trenches and pits. The excavator can be used to operate at ambient temperatures from -40 to +40°C. The machine is equipped with a semi-automatic control system, which makes it possible to mechanize the cleaning of the bottom of the earthwork being developed by it to the design marks. The bottom is cleaned with the cutting edge of the bucket when it is installed on a cleaned surface after the development of the main volume of soil (from one excavator parking lot) or with a planning dump. The excavator is also equipped with a system that allows turning the bucket around the axis of the handle at an angle of ±45° and forming slopes of narrow trenches with a laying of up to 1:1 when the excavator moves along the axis of the trench. EO-3322V is supplied to consumers with a normal stick and an excavation and leveling bucket with a capacity of 0.5 m3. According to the orders of consumers, the manufacturer can supply the following types of related working bodies: excavation and leveling bucket with a capacity of 0.4 m3; planning dump; extended handle. In addition, the EO-3322V excavator can be used with all types of replaceable working equipment and working bodies of the EO-3322B excavator. Scheme of the excavator EO-3322V R-
Technical specifications
The scheme of work of the excavator EO-3322V with an excavation and leveling bucket
Scheme of operation of the excavator EO-3322V with an excavation and leveling bucket and a normal stick I - horizontal planning zone; II - planning zone for the lower parking of the excavator; III - planning zone at the top parking of the excavator
Scheme of operation of the EO-3322V excavator with a normal handle and a leveling blade I - horizontal planning zone; II - planning zone for the lower parking of the excavator; III - planning zone at the top parking of the excavator
Scheme of operation of the EO-3322V excavator with an extended handle and a leveling blade I - horizontal planning zone; II - planning zone for the lower parking of the excavator; III - planning zone at the top parking of the excavator
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
zinref.ru
Modifications of the EO 3322 excavator and their characteristics
The basic model EO 3322 has been improved several times. As a result, several modifications of the original machine were created. The most popular were EO 3322A and EO 3322D.
A distinctive feature of all units of the EO series is fully hydraulic control. It is available in all modifications.
Also, all varieties are characterized by non-removable lifting cylinders and the lower part of the boom - the rest of the working devices are removable. Differences in the technical characteristics of the modifications are minor, but they should be considered separately.
So, excavator EO 3322 - specifications:
- cabin rotation radius - 2800 mm;
- height - 3140 mm;
- track - 2040 mm;
- maximum speed 19, 68 km/h;
- weight - 14 tons;
- engine power - from 75 to 100 hp (depending on modification);
- fuel consumption - 12.54 liters per hour;
- productivity of the hydraulic system - 18 l / min.
If we consider separately the EO 3322D excavator and the EO 3322A excavator, the technical characteristics of which do not differ much from the original model, then their characteristic feature will be a servo drive that facilitates machine control and reduced dimensions.
Otherwise, for modifications EO 3322D and EO 3322A, the technical characteristics are identical to EO 3322.
The main characteristic feature of EO 3322, as well as its modifications, is a rotating cabin, which allows minimizing unnecessary movements during operation. The cabin itself is distinguished by an extremely successful device.
The glazing area is maximum, which increases the operator's viewing radius, all control levers and control devices are located in the access zone, sound insulation has been improved, and there is also independent heating, which allows using the equipment in any weather with comfort.
Important! Excavators of the EO series in the early 90s. were discontinued, but, despite this, are in great demand and popularity.
Parts of different models of the EO series are interchangeable: removable equipment, spare parts and even a cabin from one model can be easily transferred to another.
Any excavator on the pneumatic wheel drive of the EO series can easily climb an inclined plane at an angle of up to 22 degrees. It is also able to work in extreme conditions - at temperatures from -40 to +40 degrees Celsius, it is still usable.
The basic model EO 3322 is equipped with a 4-cylinder diesel engine of the SMD-17N model (made on the basis of the MTZ tractor engine), with liquid cooling, direct fuel injection and turbocharging.
Working equipment
EO 2233 is standardly equipped with a boom and a bucket with a standard volume of 0.5 m3, mounted on a backhoe.
In addition to the standard, buckets with a volume of 0.2, 0.4, 0.63 and 0.8 m3 are compatible with the unit, depending on the type of work being carried out.
Important! A feature of EO 3322 and its modifications is fully hydraulic control. Hydraulic drives provide not only working operations, but also the movement of the excavator.
Also as removable equipment can be used:
- double jaw buckets with a volume of 0.5 or 0.32 m3;
- five-jaw buckets with a volume of 0.5 or 0.35 m3;
- hydraulic hammer SP-71;
- baking powder of various types.
EO 3323 - new generation excavator
EO 3323 is an improved and modernized version of EO 3322.
The updated model is characterized by increased productivity by an average of 20-30%, a reinforced structure and large dimensions.
It is also the first model in the line to receive a caterpillar drive.
Main technical characteristics:
- height - 3100 mm;
- maximum speed - 19.4 km / h;
- weight - 14.12 tons;
- engine power - 100 hp
Other models and modifications
Other popular models include EO 4124 and EO 6123.
The excavator EO 6123 has the following technical characteristics:
- height - 4460 mm;
- maximum speed -1.55 km / h;
- weight - 67 tons;
- engine power - 170 hp
The presence of a caterpillar drive distinguishes the EO 4124 excavator. Its technical characteristics are as follows:
- height - 4000 mm;
- maximum speed - 3.5 km / h;
- weight - 32 tons;
- engine power - 180 hp
The model has the following modifications:
- EO 4124A;
- EO 41245A-07;
- EO 4124KhL, designed for operation at low temperatures.
Design features
"Narrow" chassis. Many models in the 25-35t range have versions with a "narrow" or "narrow extended" undercarriage that is the same width as standard but longer than standard. Such a chassis increases the value of the tipping load and makes the excavator more stable when digging with an arrow in the longitudinal plane. For example JCB mod. The JS240SC with a 140 kW engine and a weight of 24.5 t is also available with a "narrow and long" undercarriage - mod. JS240NLC weighing 25.06 tons.
Additional hydraulic circuits. To increase versatility and profitability, machines can be equipped with additional hydraulic circuits with different values of flow and pressure for connecting attachments - hydraulic hammer, hydraulic shears, rotator, etc.
For example, a Hidromek excavator from the GEN series mod. The HMK300LC is already equipped as standard with an additional hydraulic line for a hydraulic breaker, a line for a hydrorotator is installed at the request of the customer.
New Holland excavators mod. E305B with a 152 kW engine and a weight of 31.62 tons, HAOA's proprietary load-sensing hydraulic system includes additional hydraulic lines for connecting a hydraulic hammer and hydraulic shears.
Small overhang at the rear. Short reach or zero reach excavators tend to be in the lighter weight classes, but builders often need excavators that can work in tight spaces while still having the lifting capacity to lift large structures, large diameter pipes and metal trenching. formwork. Therefore, models with a reduced rear overhang are now also appearing among machines of heavier sizes.
For example, from the technical characteristics of mod. Kobelco SK260SRLC-3 shows that this machine weighing 26.9 tons has a tail overhang of 190 mm from the vertical passing through the extreme point of the tracks.
Caterpillar has recently released two relatively heavy machines with reduced rear reach: mod. 325F L weighing about 27 tons and mod. 335L CR weighing just over 36,300 kg. Equipped with tracks with 800mm wide shoes, these models have rear reach of 140mm and 190mm respectively.
Maud. Volvo ECR305 weighing up to 37.34 tons and ECR235EL weighing 27.3 tons in the heaviest configuration have a rear overhang of 89 and 203 mm, respectively, with a track width of 800 mm.
Extra long working equipment. Some models in the 25-35 t class are offered in configurations with "extended" or "extra long" working equipment (long front; super long front), otherwise called "extended reach equipment". An extra long implement machine can reach 6 to 9 meters more reach than the standard model, but is just as stable with a stronger undercarriage and heavier counterweight. Typically, such machines are used for the construction and repair of port facilities and industrial settling ponds.
Just because a machine is equipped with extra long attachments does not mean that it is only designed for long reach and light duty work. Some owners of excavators purchase two sets of working equipment for their machines: standard and extra long, and use excavators for various jobs where such equipment is used, including heavy loads with a standard boom. Extra long attachment kits for installation on standard excavator models of a certain weight are usually sold only by companies that supply parts to the aftermarket.
As an example, the Komatsu Super Long Front PC290LC-10 and PC360LC-10 models can be cited, in which the reach in a horizontal plane above the ground reaches almost 18 m. Due to their features, these machines are willingly rented.
At mod. Doosan DX300LC-5 with extra long working equipment compared to the standard modification horizontal reach increased from 10.516 to 19.836 m; digging depth - from 7.29 to 13.767 m; and unloading height - from 7.264 to 11.963 m.
Hidromek has in its lineup a modification of the HMK300LCLR excavator with an extra long stick (7.8 m) and boom (10.3 m), as a result, the maximum digging radius at the parking level is 18.2 m.
Most manufacturers offering machines with "Extended Reach Equipment" point out that extra long reach excavators should not be confused with special demolition models, which can also be equipped with an extra long boom, but not always.
For example, Hitachi offers the Zaxis 240LC-5G (132kW motor, 28-28.3t) with extra long attachments. A 7.51m stick can be fitted with a 10.21m boom for a dig radius of up to 18.29m at parking level. The second option is an 8.28 m stick with an 11.32 m boom: in this case, excavation can be carried out at a distance of up to 20 m.
Attachment
The EK-12 wheel excavator has a not so large set of attachments, namely, there is a variety of earth-moving buckets that differ from each other in their volume, a front blade and a hydraulic hammer. The last unit rightfully deserves more attention, so let's consider it in detail:
Hydraulic hammer. This equipment is designed for the destruction of concrete and reinforced concrete structures and loosening of solid soil and rocks.
The unit has several types of interchangeable tools:
- Wedge. The main purpose is just the loosening of hard soils and the destruction of asphalt road sections.
- Chisel. Designed for crushing oversized hard and rocky rocks.
- Ramming tool. It is used exclusively in the compaction of loose soils. All of the above tools, of course, except for the tamping tool, can also be used during dismantling.
The characteristics of this equipment are as follows: Each blow has an energy of 3000 joules. About 270 blows can be produced in one minute. The working pressure at medium loads does not exceed 16 megapascals. It consumes 240 liters of working fluid per minute. The mass of the hydraulic hammer can vary from 900 kilogram and up to 1000 kilograms, depending on the installed interchangeable tool.
Modifications
Excavator EK-12 is available in the following modified versions:
- Modification of EK-12-10. The excavator of this model does not have any special changes, both in terms of technical characteristics and in terms of appearance. But still, the hydraulic system was slightly improved, namely, a Bosch-Rexroth hydraulic pump and a hydraulic travel motor were added.
- Modification EK-12-20. The first differences that immediately catch the eye are the modified boom and the installed front blade. But besides this, an earth-moving bucket with a volume of 500 cubic millimeters, stabilizers, and PSM hydraulics were also added. Technically, this modified version is completely identical to the base model EK-12.
- Modification of EK-12-24. This model is a slight improvement of the previous modification, namely, a hydraulic propel motor and a Bosch-Rexroth hydraulic pump have also been added. Outwardly, both modifications are completely similar.
- Modification of EK-12-40. It is the latest modified version, which has a 650 cubic millimeter earthmoving bucket, a Bosch-Rexroth hydraulic pump and a hydraulic propel motor. It is worth noting that it is in this model that the power unit from the manufacturer Perkins is used, when all other versions, including the base one, use the domestic D-243 engine.
Specifications
Dimensional data:
- Length - 8000 millimeters.
- Width - 2500 millimeters.
- Cabin height - 3150 millimeters.
- Ground clearance - 400 millimeters.
Operating values:
- Handle length - 1900 millimeters.
- The maximum digging radius is 8250 millimeters.
- The maximum bucket rotation angle is 173 degrees.
- The maximum capacity of the base bucket is 650 cubic millimeters.
- The maximum unloading height is 6400 millimeters.
- Kinematic digging depth - 8060 millimeters.
- The duration of a full working cycle is 15 seconds.
- Arrow type - monoblock.
- The operating weight of the excavator is 12900 kilograms.
- Engine type - diesel
- Engine model - D-243
- Maximum power - 60 kilowatts / 81 horsepower.
- The fuel injection system is electronic.
- The cooling system is liquid.
- Fuel consumption per working hour is 229 grams per kilowatt.
- The maximum speed of the car is 22.5 kilometers per hour.
Hydraulic system:
- The working pressure in the hydraulic system is 32 megapascals.
- Hydraulic pump - Bosch-Rexroth.
- Hydraulic travel motor optional.
Modifications
EK-12 is available in several modifications:
- classic version with a monoblock and a bucket of 0.65 cubic meters;
- EK-12-10 is supplemented with Bosch-Rexroth hydraulic pump and travel motor;
- EK-12-20 is distinguished by a reduced bucket (0.5 cubic meters), PSM hydraulics, blade support, stabilizers and a modified boom geometry;
- EK-12-24 - an analogue of EK-12-20 with a Bosch-Rexroth hydraulic pump and a travel motor;
- EK-12-40 - version with a 0.65-cubic meter bucket, travel motor, Bosch-Rexroth hydraulic pump and the latest Perkins engine (in other modifications, the D-243 engine was used).
Specifications
In the basic version, the EK-12 is equipped with a monoblock body and a bucket attachment. The total weight of the structure is 12900 kg. At the same time, the equipment has small dimensions: height - 3150 mm, width - 2500 mm, length - 8000 mm.
The maximum digging radius of the excavator is 8000 mm, the bucket immersion level is 5000 mm, and the maximum dumping height is 6400 mm. The bucket attachment of the model rotates 173 degrees. The maximum speed of the machine is 22.5 km / h, which makes it very maneuverable, allowing you to cover considerable distances.
Fuel consumption
The fuel consumption of EK-12 is 229 g/kWh. The fuel tank holds 255 liters.
Hitachi ZX200LC-5G excavator
Operating weight 19.7-20.8 tons
This model is the top seller in the Hitachi brand line. She was one of the first to be produced at a domestic plant. Under this brand, several machines are offered in the 20-ton class. In addition to the basic models, the manufacturer also produces their modifications. For example, the ZX200-5G excavator is available in a version with an increased length of the undercarriage, a narrow-sized version, with working equipment in a reinforced version. Also, consumers are offered a modification of the machine, designed to perform dismantling work.
One of the company's own developments is the HIOS III hydraulic system. Its introduction into the design of machines has made it possible to reduce fuel consumption and improve the speed parameters of working equipment. When developing the design of machines, the company's engineers focused on its reliability. The frame has an X-shape. Monolithic plates are used in its manufacture, the number of welds is minimal. Special beams are used to reinforce the turntable frame.
Engine
EK-12 is equipped with a 4-stroke 4-cylinder diesel unit of the D-243 model. Later versions are equipped with a Perkins 1104C-44 motor. In the engine compartment, the pump is located on the right, the radiators are on the left. The muffler is located above the pumping unit, creating an additional thermal load. The air filters are not well placed either. They are located in front of the radiators, which limits access and interferes with cooling. The diesel engine is started by a starter. Radiator elements are unified for all engines. Some modifications of the EK-12 are equipped with a Hydronic 10 starting heater, which makes it easier to start the engine in cold weather.
Parameters of the D-243 unit:
- working volume - 4.75 l;
- power - 60 (81) kW (hp);
- maximum torque - 258 Nm;
- rotational speed - 1600 rpm;
- cylinder diameter - 110 mm.
Price of new and used
The cost of the basic configuration of the new EK-12 excavator will be 2.9-3.1 million rubles. It is also possible to buy used equipment with a certain operating mileage. It will cost 0.7-1.2 million rubles.
Extended working equipment Reschke Rus in operation
Terex TX-210 (Amphibious Excavator)
Length 16 meters, leveling bucket 1800 mm, additional counterweight 2 tons
HITACHI ZX670-5G
Extended working equipment 18 meters, bucket 1000 liters, additional counterweight 3 tons
CATERPILLAR 320D
Length 16 meters, leveling bucket 1800 mm, additional counterweight 2 tons
CATERPILLAR 320D
Length 16 meters, drainage bucket, additional counterweight 2 tons
VOLVO EC700
Reinforced stick 2.9 m
HITACHI ZX670-5G
Extended working equipment 22 meters, rotary cutter SIMEX, add. counterweight 3.5 tons
HITACHI EX1200-5D
Handle (straight shovel)
Liebherr R924
Additional handle 2000 mm
Hyundai R250
Handle extension 3000 mm
CATERPILLAR 320 D2L
Length 15000 mm, leveling bucket 1500 mm, add. counterweight 2 tons
CATERPILLAR 320 D2L
Length 16000 mm, bucket 550 liters, add. counterweight 1.8 tons
VOLVO EC 250 DL
Length 18000 mm, light material bucket 750 liters, add. counterweight 2 tons
