Excavator EO-2626 technical characteristics, engine, used price, reviews, video, photo, buy

At present, tractors have ceased to be exclusively agricultural machinery and this type is used in almost all areas of work. This is due to the wide variety of mounted and trailed equipment, which can be installed both independently and during the tractor assembly process. One of these machines is the EO-2626 model. It combines an excavator and a loader. Most of this equipment is built on the basis of the MTZ-82 and MTZ-892 agricultural tractors.

The EO-2626 excavator itself is a fairly functional machine capable of performing all the necessary types of work related to earthmoving activities. The usual design of equipment, both in terms of operation and maintenance, as well as a rather low cost in comparison with imported counterparts, ensured great popularity in various CIS countries. EO-2626, of course, is in great demand on the territory of the Russian Federation.

A reliable, time-tested power unit is installed, namely, a four-cylinder diesel D-243. The rated output power reaches 60 kilowatts or 82 horsepower. This motor has a water closed cooling system with forced circulation of liquid, which protects the engine from overheating when operating in hot weather or when subjecting to high loads.

Purpose

The EO-2626 excavator has a fairly wide scope, namely, it can be used in agriculture, various industries, forestry, construction or during dismantling, road repair work, as well as in public utilities.

Basically, the machine is used for doing various earthmoving works, namely, digging pits, trenches and filling them up; creation of embankments; leveling work sites, as well as the development of wells. In addition, the machine can carry out the transportation of any goods over short distances; perform loading and unloading of bulk materials (loose soil, sand, gravel, crushed stone, and so on); clean the area from industrial waste (during dismantling). In public utilities, the excavator is used for its intended purpose - loading and digging, but in the winter season, most often the equipment clears sections of streets, the roadway and the territories of various industries from a large mass of snow, while using its standard attachments.

Excavator EO 2626 - features and scope

Excavator EO 2626 belongs to the class of machines designed for earthworks of small volume .

It can be used in soil conditions of any class, including complete off-road conditions.

The unit is ideal for work in farms.

Advantages of using the EO 2626 backhoe loader:

Ease and safety of maintenance;
Low cost of repair , availability of spare parts;
Endurance , providing productive work in the most difficult conditions;
The ability to quickly connect additional attachments using the hydraulic distributor of the base chassis;
Variety of attachments for versatility of use.

Important!
The excavator loader of this model is irreplaceable for use in agriculture. It is easy to repair thanks to cheap and affordable parts. Attachments used on this excavator model include:

Jaw loading bucket;
bulldozer blade;
Loading bucket;
Grab;
hydraulic hammer;
Single-tooth ripper;
Drilling fixture;
Device for moving stones;
Cargo forks;
Special crane suspension.

Due to this, the excavator has a fairly wide scope :

Digging holes or ditches;
Loading and moving bulk materials;
Site planning for construction;
Erection of embankments of various heights;
Clearing the area from snow or debris;
Loosening rocky soil;
Loading of agricultural materials (silage, sawdust, cake, peat, compost).

The design of the excavator will help to use it on too loose or blurry soils. A special reloading bucket allows such operations to be carried out without problems.

Attachment

The EO-2626 excavator does not have many attachments that can be used in the workflow, but the range of basic equipment includes all the necessary equipment to carry out the tasks. The machine is designed to install the following attachments:

Front bucket. This tool is designed to perform loading and unloading of bulk materials. It can also be used for transporting cargo over short distances, for clearing the working area from industrial waste during the dismantling of any objects, and for filling pits and pits.
Front dozer blade. This equipment is also used for cleaning work sites, but in addition it is often used for leveling the soil of territories and filling holes. In addition, this unit is most often used to fulfill the purposes of public utilities, namely for clearing street areas and carriageways from large snow masses.
Buckets. There are quite a few types and versions of buckets that allow you to carry out different types of earthmoving work: digging trenches, pits and creating embankments of soil and other similar materials in the right places. Each bucket differs, as a rule, in its width, capacity and weight.
Hydraulic jackhammer model HM-120. This is an indispensable equipment in carrying out dismantling work. It is also occasionally used in road repair work, where it serves to remove asphalt sections.

Excavator EO-2626 technical specifications

industry » Special equipment » Excavators » ZLATEX

Excavator Zlatex EO-2626 is a multifunctional excavator-loader manufactured in such modifications as EO-2626.DT, EO-2626.DT.1, EO-2626.DT.2.

These excavators are equipped with a D-243 diesel engine with a power of 82 kW.
All three modifications are made on such a basic chassis as Belarus 80.1, 82P, 92P, 952, 920, 892, 82.1. Excavator EO-2626 specifications:

Dimensions, weight characteristics. Excavators modifications DT, DT.2: width 2500 mm;
height 3800 mm;
length 7630 mm;
design weight 5950 kg;
operating weight 6350 kg;
distribution of operating weight along the axes of the excavator (front / rear) - 1300 kg / 5050 kg.

Excavator modification DT.1:

height 3800 mm;
length 7700 mm;
design weight 6400 kg;
operating weight 6800 kg;
distribution of operating weight along the axes of the excavator (front / rear) - 1400 kg / 5400 kg.

Working characteristics:

overcome slope 13 degrees;
ground clearance 190 mm;
pressure in the hydraulic system 16 MPa;
minimum outer turning radius 7000 mm;
fuel consumption level 13 l/h;
duration of work without refueling 10 h.

Excavator EO-2626 technical characteristics of standard equipment:

Loader. Excavators of modifications DT, DT.2: nominal bucket capacity 0.8 m3;
cargo unloading height 2750 mm;
bucket reach 730 mm;
bucket tipping/unloading angle - 40/45 degrees;
breakout force when turning the bucket 11.8 kN;
breakout force when lifting the boom 16.7 kN;
bucket weight 290 kg.

Excavator modification DT.1:

cargo unloading height 3720 mm;
bucket reach 600 mm;
bucket tipping/unloading angle - 40/45 degrees;
breakout force when turning the bucket 12 kN;
breakout force when lifting the boom 17 kN;
bucket weight 420 kg.

Backhoe:

soil digging depth 4100 mm;
soil digging radius 5400 mm;
soil unloading height 4000 mm;
equipment rotation angle 170 degrees;
the duration of the working cycle is 25 s.

Backhoe loader Zlateks EO-2626 can be equipped with the following additional equipment:

Bucket NPO-095.05 - loading equipment used for excavators of modifications EO-2626.DT, EO-2626.DT.2: bucket capacity 0.5 m3;
bucket weight 230 kg;
height / width / length - 780 mm / 2000 mm / 810 mm.

Bucket EO-2626.03 - excavator equipment:

bucket weight 200 kg;
height / width / length - 869 mm / 560 mm / 1010 mm.

Narrow bucket EO-2626.031 – excavator equipment:

bucket weight 120 kg;
height / width / length - 860 mm / 320 mm / 1010 mm.

Jaw bucket EO-2626.01 – excavator equipment:

bucket weight 250 kg;
height / width / length - 880 mm / 560 mm / 1150 mm.

This excavator is used in the implementation of earthworks in soils of the first, second, third, fourth categories, loading operations. Also, the excavator can be operated in frozen soils, soils above the fourth category, but after their preliminary loosening. Excavator model EO-2626 operates at a temperature of minus 40 - plus 40 degrees Celsius.

The excavator of this model, depending on the equipment, can carry out the following types of work:

Modifications

The EO-2626 excavator has only one modified version:

Modification of EO-2626-01. This version has a more modern design and additional equipment. The design was slightly improved, which made it possible to achieve increased stability when performing earthmoving work. In addition, in terms of strength, the boom and handle have been improved, as their designs have also been subjected to some changes.

In terms of overall dimensions, the modification came out a little smaller than the base machine. This was achieved through the use of a new perpendicular folding scheme of the hydraulic manipulator in relation to the axis of motion. It is worth noting that this is even a big plus, since due to the small overall dimensions, the maneuverability of the excavator has been significantly improved. These changes made it possible to use the machine in work in cramped urban conditions, which significantly affected the functionality and practicality.

In terms of technical characteristics, the modification is no different from the base excavator. The car just received an updated design. The base excavator was intended exclusively for work in households and agriculture, when the modified version contributed to the expansion of the range of work performed, as it was focused on mass consumers and public organizations.

In addition to these changes, there is also a modern hydraulic system designed for a large load capacity. The working equipment began to make any movements more smoothly and accurately, as a special system referred to as "Hydrocontrol" was introduced. Also, in the new excavator, it became possible to combine various actions, and standard mounted units have become more protected from external damage associated with operator errors during operation.

The key feature of this model from the base one is the axis with the possibility of its longitudinal displacement. This allows you to perform the necessary operations at a fairly close location to the fences, walls of various structures and other similar enclosing objects. The maximum digging depth was also increased to 4340 millimeters, due to the use of a longer handle and boom. If the EO-2626 was built on the basis of the MTZ-82 tractor, then the MTZ-92P tractor served as the basis for the modified version.

HYDRAULIC SYSTEM OF JAWL EXCAVATORS - LOADERS:

A modern sectional hydraulic valve with built-in safety and anti-cavitation valves produced by Hydrocontrol (Italy) ensures smooth combination of operations of excavator equipment and the accuracy of its operation, protects it from mechanical damage due to operator errors. It is possible to quickly install a section for the proposed additional equipment.

Controls are ergonomically located at arm's length. Two four-position levers for smooth, precise control of the backhoe attachment, with the possibility of combining operations, are conveniently located on the rear control panel. Loading equipment is controlled by a hydraulic valve that is part of the hydraulic system of the chassis - tractor, it is also possible to control the hydraulic valve of excavator equipment.

Technical characteristics of jaw excavators - loaders EO-2626.01, EO-2101:

Options

EO-2626.01	EO-2101
Basic Tractor	Belarus 82P / Belarus 82.1	Belarus-82.1, Belarus-892, Belarus-826, Belarus-92P, YuMZ
Characteristics of EXCAVATOR equipment:
bucket capacity, m3	0,28	0,28
digging depth, m, max.	3,9	4,3
maximum unloading height, m	3,2	3,6
Characteristics of FRONT LOADING equipment:
bucket capacity, m3	0,8	0,8

Specifications

Dimensional data:

Length - 7900 millimeters.
The width of the rear wheels is 2400 millimeters.
The total height of the structure is 3900 millimeters
Ground clearance - 190 millimeters.

Operating values:

Structural weight - 6900 kilograms.
The unloading height of the reloading bucket is not less than 2600 millimeters.
The width of the cutting edge of the reloading bucket is 2000 millimeters.
Type of excavator bucket - backhoe.
The nominal capacity of the base excavator bucket is 250 cubic millimeters.
The width of the cutting edge of the base excavator bucket is 550 millimeters.
The maximum capacity of the front loading bucket is 630 cubic millimeters.
The maximum digging depth is 4100 millimeters.
The maximum digging radius is 5200 millimeters.
The maximum unloading height is 3500 millimeters.
The installed engine is a four-cylinder, diesel D-243 brand.
The engine manufacturer is MMZ (Minsk Motor Plant).
Rated output power - 60 kilowatts / 82 horsepower.
The maximum torque is 290 Newtons per meter.
The cooling system is liquid with forced circulation.
Gradeability on a dry hard track - no more than 13 degrees.
Steering - with hydraulic power steering.

Transmission:

Gearbox type - mechanical.
The number of forward gears is 17.
The number of reverse gears is 4.
The maximum forward speed is 32.5 kilometers per hour.
The maximum reverse speed is 25.4 kilometers per hour.

Chassis:

Wheel formula - 4X4.
Automatic locking differential on the front axle.
The size of the front wheels is 11.2 / R20.
The size of the rear wheels is 15.5 R38.
Weight on the front axle - 1300 kilograms.
Weight on the rear axle - 5050 kilograms.

Hydraulic system:

The duration of the working cycle is no more than 16 seconds.
The working pressure of the hydraulic system is 16 megapascals.
The nominal load capacity of hydraulics is 800 kilograms.
Total liquid content:
Hydraulic system - 20 liters.
Fuel tank - 130 liters.

Characteristics of the backhoe loader EO 2626 and features of modifications: EO 2626 01, EO 2626 dt

Backhoe loader EO 2626 is a universal, multifunctional excavator device with a wheeled way of movement. Thanks to an extensive set of attachments, it can perform a wide range of work, but is mainly used for digging holes, pits, trenches, as well as loading and unloading within construction sites. Equipped as standard with front loader and boom with bucket.

EO 2626 and its modifications are produced in Belarus on Pinsky. The basis for the excavator is the tractor of Minsk production MTZ-82 or MTZ-92. The compactness, maneuverability and high cross-country ability of the machine make it possible to use it even in difficult and limited road conditions, and the MTZ reliability makes it practically indispensable equipment at any construction site, in public utilities and even agriculture.

With the help of the excavator loader EO-2626, the following work is easily performed:

Specifications

The main characteristics of EO-2626 are presented in the following table:

Parameter	U measurement	Value
width (track)	mm	2500
length	mm	3630-3700
height	mm	3800
weight (operational)	kg	6350-6800
ground clearance	mm	190
engine power	hp	78(82)
maximum possible speed	km/h	18
electrical equipment	IN	12
fuel consumption	l/h	10-13
ladle	m3	0.6-0.8
digging depth	mm	4100
unloading height	3500-4000

Photo of backhoe loader eo 2626

Engine

The engine on the EO 2626 is installed brand D-243 - diesel, four-stroke, four-cylinder piston without turbocharging, which runs on direct fuel injection. For him:

cooling is used liquid with forced circulation of coolants;
the arrangement of the cylinders is used vertical;
piston stroke -125 mm;
crankshaft speed - 1750 rpm.

Transmission and steering gear

The steering wheel on the backhoe loader is installed with a worm gear, which increases the maneuverability of the machine, with the addition of a hydraulic booster (helical sector) to facilitate the operator's efforts when turning the steering wheel.

The transmission mechanism includes a nine-speed manual gearbox. It is reinforced with a gearbox that doubles the number of gears, which on this technique are 18 forward and 4 reverse (18/4).

Hydraulic system

The type of hydraulics used in the control of the mounted system is a separate-aggregate, universal. It uses a pump type NSh-100 with a capacity of 130 l/min.

A feature of the backhoe loader is the ability to control the operation of the hitch at the operator's choice from hydraulic distributors both on the base chassis and on the excavator itself.

When controlling the equipment outside the cab, the maximum accuracy of movements is achieved, which in other similar special equipment occurs only thanks to the expensive video surveillance systems installed on it, connected to the onboard processor.

Chassis

The EO 2626 excavator loader uses a wheel running system on pneumatic tires. Four-wheel drive on all 4 wheels increases the cross-country ability of the car - it is not afraid of rough terrain and off-road. In this case, the rear wheels perform the leading function, and the front wheels - the leading and guiding.

Device and design

In the basic configuration, the excavator has the following features:

Made in Italy hydraulic valve, giving high performance with smooth operation.
Telescopic device with a shiftable digging axis, which allows you to work even in small areas
Front loader and rear boom bucket.
Perpendicular to the movement of the machine, the direction of folding excavator equipment, which reduces the volume of equipment.
Spacious cab with wide glass area for improved visibility.
Convenient windshield wiper and washer with electric control.
Equipped with a heating system for the operator's cab.

Additionally, EO 2626 can be equipped with bulldozer equipment, a hydraulic hammer, a drilling rig, a crane with a hook, etc.

EO 2626 serves as the basis for several modifications:

EO-2626.DT
EO-2626.DT.1
EO-2626.DT.2
EO-2626 01, etc.

These models differ in the type of tractor chassis: they are built on tractors of the MTZ type of brands 80.1, 82P, 82.1, 92P, 920, 952, for which models with the index 92 have slightly more power with the addition of ease of operation and maintenance.

On the video, the capabilities of the EO 2626 backhoe loader:

Source: https://allspectech.com/stroitelnaya/jekskavatory/pogruzchiki/eo-2626.html

Peculiarities

The EO-2626 excavator has a fairly large number of features, some of which were added at the production stage, when others were inherited from MTZ. Let's take a closer look at all the key advantages:

The machine can boast of its high endurance, reliability and maneuverability. The equipment is resistant to various weather conditions: it will not overheat in the heat, will not stall from excessively dusty air, and the engine will easily start at low temperatures, which is typical for the MTZ-82 tractor.
Small costs for any kind of work. Excavator EO-2626 in terms of the ratio of productivity to the volume of operating costs in its category of special equipment holds a leading position.
Large range of attachments. The machine allows, in addition to the basic units, to use a large number of additional equipment, focused on performing a certain kind of work. For example, a variety of buckets, dumps and a hydraulic hammer.
Maintainability and availability of spare parts. Most of the malfunctions and problems with the operation of any components and mechanisms can be solved in a short time on their own, since the design provides easy access to all elements that require regular checks for wear and replacement. Due to the wide distribution of this technique, the search for the required spare parts will not cause large financial losses and a long search time.
Functioning of mounted units from two distributors of the hydraulic system. Unlike other similar machines, this excavator has the ability to control working equipment, both in the cab and outside it. Thanks to this, you can do neat and accurate work.
Comfortable cab. The cab of the excavator is quite spacious, bright and safe. The large glass area provides the operator with a wide view from the workplace. Of the internal equipment, it is necessary to note a windshield washer, a heating system, electric wipers, as well as an instrument panel with a variety of indicators and instruments that provide full control over the operation of all excavator systems.

Engine

Under the hood of the excavator EO-2626, a Minsk-made diesel engine D-243 is installed. This motor allows you to develop a maximum power of 60 kilowatts or 82 horsepower. Four cylinders with a diameter of 110 millimeters are arranged in a row in the engine block. Their total volume is 4750 cubic milliliters. The piston stroke has a value of 125 millimeters. The specific fuel consumption for one working hour is about 229 grams of diesel fuel per kilowatt. The maximum torque, reached at 1600 rpm, reaches 290 Newtons per meter. The nominal rotation of the crankshaft does not exceed 2200 rpm. The compression ratio in the combustion chambers reaches 16. In a fully assembled and dry form, this engine has a mass of 430 kilograms.

EO 2626

Excavator loader EO 2626

SPECIFICATIONS:

• Common data •

Base chassis ………………………… Belarus (MTZ) -82 / 92.P Operating weight…………………………………………6 700 kg Overall dimensions ………………… …….8500x2500x3900 mm Geometric capacity of the loader bucket ….0.38 – 0.8 m3 Nominal capacity of the excavator bucket ……………0.28 m3 Digging depth …………………………………………… ………4.25 m Maximum digging radius ………………………………….5.3 m Maximum unloading height ………………………………………3.2 m Maximum height loading …………………………………3.2 m Maximum travel speed ………………20 km/h

• Engine •

Engine model ………………………………………………… D-243 Type — 4-cylinder, diesel, four-stroke with direct fuel injection Engine power ……………………. 78+5 hp (57.4+3.7kW) Rated crankshaft speed ……………. 750 rpm Number of cylinders ……………………………………………………………. 4 Cylinder displacement ………………………………………………. 4.75 l

• Electrical equipment •

Voltage………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………….

• Transmission •

Type - manual gearbox, clutch - double dry friction with a two-speed PTO gearbox. The number of gears (forward / backward) - 10/2 Brakes - disc.

• Cabin •

Spacious and light cabin of safe design with excellent visibility. A cab with a heating system, with an electric wiper and washer, an instrument panel with indicators and instruments that control and inform about the operation of the excavator systems.

• Hydraulic system •

Type of hydraulic system — universal separate-aggregate Pump type ………………НШ 100 Pump capacity …. 130 l/min Nominal pressure ………..14 (140) MPa (kgf/cm2)

On request, the EO-2621 excavator can be equipped with:

clamshell bucket;
pitchfork;
hydraulic hammer;
lifting device;
buckets: special, narrow, profile, ripper tooth, drilling equipment.

Price of new and used

The EO-2626 excavator in a completely new technical condition can be found on the markets at a cost of 1.2 million to 1.5 million Russian rubles. The change in cost depends on the year of manufacture of the equipment, version (modified or basic), configuration and type of attachments installed.

Used cars in good technical condition have a cost of 800 thousand to 900 thousand Russian rubles. Earlier models in poor condition will cost between 300 thousand and up to 600 thousand rubles, but it makes almost no sense to purchase an excavator in this condition.